NordicTrack C100 User Manual page 10

6. Identify the Right Handrail (84).
Attach the Right Handrail (84) to the Right
Upright (90) with two 5/16" x 3" Screws (28)
and two 5/16" Star Washers (11). Make sure
not to pinch the Upright Wire (81). Start both
Screws, and then tighten them.
Attach the Left Handrail (not shown) to the
Left Upright (not shown) in the same way.
Note: There are no wires on the left side.
7. Set the Console Base (64) face down on a soft
surface to avoid scratching the Console Base.
Remove and discard the two screws (A) from the
Pulse Crossbar (93). Then, remove the Pulse
Crossbar.
6
84
7
A
93
10
28
11
81
90
64
A