Linksys PAP2-VU Installation And Troubleshooting Manual page 17

Phone Adapter with 2 Ports for Voice-over-IP
Action Command
(press these
keys on the
telephone)
Set Static IP Address 111
Check Network Mask 120
(or Subnet Mask)
Set Network Mask (or 121
Subnet Mask)
Check Static Gateway 130
IP Address
12
Interactive Voice Response Menu
Choices
Enter the IP
address using
numbers on the
telephone keypad.
Use the * (star) key
when entering a
decimal point.
Enter the network
mask using
numbers on the
telephone keypad.
Use the * (star) key
when entering a
decimal point.
Description
To set a static IP address, the DHCP
feature must be disabled. If the DHCP
feature is enabled, then you will hear,
"Invalid Option," if you try to set a
static IP address.
You will hear the current network
mask of the Phone Adapter.
To set the network mask, the DHCP
feature must be disabled. If the DHCP
feature is enabled, then you will hear,
"Invalid Option," if you try to set the
network mask.
You will hear the current gateway IP
address of the Phone Adapter.
Chapter 4: Using the Phone Adapter's Interactive Voice Response Menu
Using the Interactive Voice Response Menu