Advertisement
LIGHT ACTIVATION
The Executive Series has two methods of light
activation. The tailcap pushbutton switch can be
pressed for momentary and constant light.
MOMENTARY-ON
Partially depress the tailcap pushbutton switch for
momentary activation. Note: If light fails to function,
the tailcap may be in the lock-out position; the tailcap
must be tightened for the light to activate.
CONSTANT-ON
For constant light, fully depress the tailcap pushbutton
switch to the "click-on" position.
CAUTION
Ensure that the flashlight cannot be turned on when
stored or being transported. If the lamp is activated while
in a case or other container, the lamp could overheat and
cause damage to surrounding materials. Store flashlight
in the lock-out position or remove batteries.
Advertisement
