Linkcom Door phone User Manual page 13

d – maximum time in minutes for which a call may last. This time can be extended
during a call by dialling Prolong Call digit from telephone (∗ or #). Time setting is
per table.
Parameter Value Description
53 w
w – max. time [sec] between button presses [range 1-9]
- relay closing – if time between two next presses is bigger than w time, the code is not
evaluated correctly.
- dialling – if the button pressed is the first password number for switch closing, so the choice is
delayed by this w time.
Parameter Value Description
54 z
z – time [sec] for which the unit will hang up, before repeat dialling (button pressing during call or dialling,
busy tone detection) [range 1-5]
Parameter Value Description
55 z
z – time [sec] after unit goes on hook before dialling [range 1-5]. This time is different for each PBX, but
most PBXs usually manage to process dialling up to 2 seconds after line on hook.
Parameter Value Description
56 h
h – specifies the amount of time spent ringing before the unit hangs up and tries the next number.
Parameter Value Description
57 t
58 m
59 f
50 p
– DTMF tone duration is determined by the formula:
t
(entered number + 5) x 10 = tone duration [ms]
m –
Space duration between DTMF tones
(entered number + 5) x 10 = gap duration [ms]
– Recall duration is determined by the formula:
f
entered number x 100 = Recall duration [ms]
p – Pause duration is determined by the formula:
entered number x 100 = pause duration [ms]
time between button
presses
On hook time before new
call
Call start time
Number of rings before
hanging up or group mode
switching
DTMF tone duration (ms)
Space duration between
DTMF tones (ms)
Recall duration (ms)
Pause duration (ms)
[range 1-0 i.e. 60-150ms]
is determined by the formula:
[range 1-0 i.e. 60-150ms]
[range 1-6 i.e. 100-600ms]
[range 5-0 i.e. 500-1000ms]
Default Exam.1 Exam.2
2 2 2
Default Exam.1 Exam.2
2 2 2
Default Exam.1 Exam.2
1 1 1
Default Exam.1 Exam.2
12 12 12
Default Exam.1 Exam.2
5 5 5
(100ms) (100ms) (100ms)
5 5 5
(100ms) (100ms) (100ms)
1 1 1
(100ms) (100ms) (100ms)
8 8 8
(800ms) (800ms) (800ms)
time
choice
[min]
0,5 0
1 - 9 1 - 9
∗
15
30 #
13