Basic Parameters; Time Parameters - Linkcom Door phone User Manual

5.3 Basic parameters

Parameter Value Description
41 v
v – dial type
v=0 is DTMF tone dial, v=1 is pulse dial
Parameter Value Description
42 z
z – button for call prolongation ∗ or # (10 sec before Maximum Call Duration the unit will emit a tone.
Pressing this button will prolong the call)
Parameter Value Description
43 bb
bb – command for unit hanging up from phone [2 digits]
It is recommended to set the same command for both Internal Access Code (parameter 35) and End Call
aa=bb.
Parameter Value Description
44 xxxx
xxxx – service password for entry to programming
Parameter Value Description
45 dd
NIGHT MODE switching
46 nn
dd – command for DAY
nn – command for NIGHT
Note: The switchover to Day/Night mode remains set in unit even after line disconnection.
Parameter Value Description
47 e
e – operating mode of unit
e=0 selects 2-Group mode, e=1 selects Day/Night mode.

5.4 Time parameters

Parameter Value Description
51 q
q – Number of incoming call rings before a call is picked up. The number can be set from 1 to 9.
Parameter Value Description
52 d
Dialling type
Prolong call
End call
Password
DAY MODE switching
switching [2 digits]
MODE
switching [2 digits]
MODE
Dialling mode
Number of rings before
pick-up
Maximum call duration
Default Exam.1 Exam.2
0 0 0
Default Exam.1 Exam.2
∗ ∗ ∗
Default Exam.1 Exam.2
55 55 55
Default Exam.1 Exam.2
0000 0000 0000
Default Exam.1 Exam.2
11 11 11
10 10 10
Default Exam.1 Exam.2
1 1 0
Default Exam.1 Exam.2
2 1 2
Default Exam.1 Exam.2
2 1 4
12