Installation Instructions - Stokke PIPA User Manual

If harness slots are not AT or BELOW shoulder height, child could
be ejected in a crash or sudden stop. If harness slots need to be
moved, see section changing harness slot position. (Page 17)
Make sure that nothing interferes with the harness. Make sure
harness is snug around child and lays flat. Serious injury or death
could occur to a child that is not secured properly.
If child is not secured properly, child could be ejected in a sudden
stop or crash, resulting in serious injury or death.

Installation instructions

Base install - Rigid LATCH
(Lower Attachments)
• Place vehicle in park and on level ground.
• Position base in a forward facing vehicle
seat. Use recline adjustment to position
bubble in indicator. Adjust base so bubble
touches line.
Stokke® PIPA™ by Nuna®
EN 23