Changing Harness Position - Stokke PIPA User Manual

Infant insert
• The infant insert can be used as necessary
to provide a snug fit for small babies. The
low birth weight pillow (shown in grey)
can be used in the infant insert for even
smaller babies, but should be removed
once unnecessary. The low birth weight
pillow should be removed once a snug fit can be achieved without it, at approximately 11lbs.

Changing harness position

Shoulder belts
1. With child placed in car seat, identify harness slots at or below shoulder level.
2. With child removed, loosen harness. Turn
carrier over and remove one harness loop
from metal splitter plate. To remove the
metal splitter plate the harness cover first
has to be removed.
Continues on next page.
Stokke® PIPA™ by Nuna®
EN 17