Vesa Mount On Your Monitor - NEC LCD1711M Service Manual

VESA Mount on your monitor

This monitor conforms to the VESA Flat Panel Mounting Physical Mounting
Interface Standard which defines a physical mounting interface for flat
panel monitors, and corresponding standards for flat panel monitor mount-
ing devices, such as wall and table arms. The VESA mounting interface is
located on the back of your monitor.
To mount the monitor on a swing arm or other mounting fixture, follow the
instruction included with the mounting fixture to be used.
VESA
Mounting
Interface
Caution! Please select the proper screws!
The depth from plastic back cover to the bottom of the screw hole
is 8 mm. The spec is M4 screw. To fulfil the safety requirements
the monitor must be mounted to an arm which guarantees the
necessary stability under consideration of the weight of the moni-
tor. The LCD monitor shall only be used with an approved arm
(e.g. GS mark).
7 – User's Manual
100 mm
1-8
Slots
100 mm