Fcc Information - NEC LCD1711M Service Manual

FCC Information

1. Use the attached specified cable with the LCD1711M color monitor so as
not to interfere with radio and television reception.
(1) Please use the supplied power cord or equivalent to ensure FCC compliance
(2) Please use the supplied AC Adapter.
(3) Please use the supplied Audio Cable.
(4) Please use the supplied VGA Cable.
Use of other cables and adapters may cause interference with radio and
television receiption.
2. This equipment has been tested and found to comply with thie limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installtion. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular install-
ation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
w Reorient or relocate the receiving antenna.
w Increase the separation between the equipment and receiver.
w Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
w Consult your dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/tele-
vision technician for additional suggestions. The user may find the following
booklet, prepared by the Federal Communications Commission, helpful:
“How to Identify and Resolve Radio-TV Interference Problems.” This booklet is
available from the U.S. Government Printing Office, Washington, D.C., 20402,
Stock No. 004-000-00345-4.
This device complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions. (1) This device may not cuase harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
U.S. Responsible Party:
Address:
Tel. No.:
Type of Product:
Equipment Classification:
Model:
conforms to the technical standards as specified in the FCC Rules.
Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC
Corporation.
E S
NERGY TAR
are trademarks or registered trademarks of their respective owners.
As an partner, NEC-Mitsubishi Electronics Display of America has determined
®
E S
NERGY TAR
that this product meets the Energy Star guidelenes for energy efficiency. The
does not represent EPA endorsement of any product or service.
DECLARATION OF CONFORMITY
NEC-Mitsubishi Electronics Display of America, Inc.
1250 North Arlington Heights Road, Suite 500
Itasca, Illinois 60143-1248
(630) 467-3000
Display Monitor
Class B peripheral
LCD1711M
we hereby declare that the equipment specified above
is a U.S. registered trademark. All other brands and product names
®
1-18
emblem
E S
NERGY TAR
LCD1711M - 84