NEC LCD1711M Service Manual page 33

4 Disassembly of LCD Panel, Speakers
1. Use phillip screw driver to detach the LCD panel and Rear cover (Figure 15).
Unplug speaker wires, audio wire and Connector wire and then unscrew the two
screws and unplug another speaker wire to tear off Audio board. (Figure 16)
Unscrew the four screw to take off speaker.(Figure 16)
Figure 15
2. Tear off the tape first and unscrew the two screws of Inverter Bracket Mylar to remove
it (Figure 17) and then unplug panel wires and unscrew the two screws, unplug connector
to remove the Inverter Board.(Figure 18)
Figure 17
Inverter Bracket Mylar
Figure 16
Speakers wire
Pink
Blue
Pink
Blue
Figure 18
Speakers