Table of Contents
Advertisement
Determining Storage System Status and Verifying
Faults
The System Summary page shows you the overall status of the storage system.
To view storage system status:
1. Select Monitor > Status > Status Summary.
2. Check the status icon at the upper left corner of each panel.
A green icon
■
operating normally.
A red icon with an exclamation point
■
associated with that panel has a fault and is operating in a degraded state or is
offline.
Figure 4-1 Status Summary Page with a Fault Identified by Status Icons
3. Review each panel that has a fault icon.
indicates that components associated with that panel are
indicates that at least one component
Chapter 4 Troubleshooting Using RAIDar
37
Advertisement
Table of Contents
Troubleshooting
