Table of Contents
Advertisement
8. To start the firmware update, click Start Firmware Update.
To cancel the firmware update, click Cancel.
The file is transferred to the controller where it is temporarily stored prior to
download to the disk drives. Once the firmware update process has started, the
Drive Firmware Loading Progress page provides the update progress of each disk
drive, including when the firmware update completes successfully.
This operation can take many minutes or hours to complete. During the update, the
following operations are blocked so that they do not interfere with the update:
Updating controller software (buffer interference)
■
Saving logs to a file (buffer interference)
■
Displaying disk drive read-cache status (SCSI interference)
■
When all selected drives have been updated, a message indicates that the update is
complete.
9. Verify that the proper firmware version, size, and speed are reported for each
updated disk drive.
10. Restore host access to the storage system and optionally enable background scrub.
Chapter 7 Troubleshooting and Replacing FRUs
103
Advertisement
Table of Contents
Troubleshooting
