Monitoring The Input Signals Of Specific Tracks (Pfl/Solo) - Zoom F8 Operation Manual

Monitoring the input signals of specific tracks (PFL/SOLO)
You can monitor the input signals of specific tracks. You can also make various settings for selected tracks.
1.
Press on the tracks that you want to monitor.
The selected track keys will light orange, and the PFL screen
will open.
"PFL" or "SOLO" appears at the top of the display, and you
will be able to monitor the input signal with headphones.
PFL mode
Parameter
Phantom This sets phantom power supply.
HPF This sets the high pass filter.
Input Limiter This sets the limiter.
Fader This sets the fader level.
Pan This sets the panning.
Phase Invert This sets the phase.
Side Mic Level This sets the side mic level of a mid-side mic capsule.
Parameter names
Level meter
(prefader input
signal level)
Explanation
Parameter
Input Delay This sets the input delay.
Plugin Power This sets the plugin power.
Stereo Link This sets the stereo link.
Stereo Link Mode This sets the stereo link mode.
PFL Mode This sets the monitoring volume on the PFL screen.
HINT
• Use to select parameters and change setting values.
2.
Press or .
F8
Multi Track Field Recorder
Explanation
57