Selecting Signals Sent To The Sub Outputs (Sub Out Routing) - Zoom F8 Operation Manual

Selecting signals sent to the sub outputs (SUB OUT Routing)

You send either prefader or postfader signals for each track to the sub outputs.
1.
Press .
2.
Use to select "OUTPUT" ,
and press .
3.
Use to select "SUB OUT
Routing" , and press
4.
Use to select the track for SUB OUT 1 or SUB
OUT 2 routing and press
.
.
Select prefader
Select postfader
Off
HINT
Press to cycle through the options: Prefader
Off.
NOTE
• Tracks 1–8 can be set to Prefader or Postfader.
• The L/R tracks can only be set to Postfader.
• Tracks 1–8 and L/R tracks cannot be set at the same time. Selecting
one type will deselect the other.
5.
Press .
F8
Multi Track Field Recorder
Tracks routed to SUB OUT 1
Tracks routed to SUB OUT 2
Clear all settings
Set tracks 1–8 to prefader
Switch options:
• Change tracks 1–8 to
postfader
• Change L/R tracks to
postfader
Postfader
85