Changing Scene Names - Zoom F8 Operation Manual

Changing recording take settings (Next Take)
Setting value Explanation
The scene name and number are not used.
When recording files are created, they are named
only with the take number: "T001", "T002",
None "T003", etc.
number by 1.
Example: T001.wav
The name of the currently selected folder is used
as the scene name.
number by 1. After advancing the scene number
Current Folder
by 1, the corresponding folder will be used as
the recording destination. If that folder does not
already exist, it will be created.
Example: FOLDER001-T001.wav
The date is used as the scene name.
number by 1.
Date
If recording occurs after the date changes, a
scene folder with the date will be created.
Example: 20150101-T001.wav
A scene name input by the user is used.
User Name number by 1.
No folder is created in this case.
Example: MYSCENE001-T001.wav
38
+ cannot be used to advance the scene
+ can be used to advance the scene
+ cannot be used to advance the scene
+ can be used to advance the scene
(continued)

Changing scene names

If Scene Name Mode is set to User Name, set the scene name
used like this.
4.
Use to select "User Scene
Name" , and press
5.
Use to select "Edit" , and
press .
6.
Edit the scene name.
See "Character input screen" (
P .12) for how to input characters.
NOTE
• The scene name is written to the <SCENE> metadata.
• You cannot put a space or an @ mark at the beginning of
the name.
.