Setting signals sent to headphones (Headphone Routing)
You can set the type of signal sent to the headphone output to either prefader or postfader for each track.
1.
Press
.
2.
Use
to select "OUTPUT" ,
and press
.
3.
Use
to select
"Headphone" , and press
Continue to one of the following procedures.
Setting the routing ............................................................P .72
Using mono headphone output .......................................P .73
Monitoring mid-side stereo signals .................................P .74
72
.
Setting the routing
4.
Use
to select "Headphone
Routing" , and press
5.
Use
to select the tracks/outputs for headphone
routing and press
Mid-side stereo
monitoring
Set tracks 1–8
to prefader
(deactivates MS)
Cycles options:
• Change tracks 1–8 to
postfader (cancels others)
• Change L/R to postfader
(cancels others)
Prefader selected
• Change M1/M2 to
Postfader selected
postfader (cancels others)
Off
• Change S1/S2 to
postfader (cancels others)
(deactivates MS)
.
.
Tracks routed to the
left headphone
channel
Tracks routed to the
right headphone
channel
Mono mix
Clear all settings