Devices - Display - Eneo DLR3-04 series Operating Instructions Manual

Setup menu (continued)
Devices – Display
On the "Display" menu the mode of on-screen display is configured.
● "OSD" tab: Specify what additional information is displayed on-screen.
● "Main Monitor" tab: Specify how the camera images are displayed on the main monitor.
NOTE:
With the DLR3-04 recorder, only one of the two principal monitor outputs can be used at once. If a VGA
monitor is connected to the recorder, the FBAS output is automatically switched off. Consequently,
switching is not possible. In the event that a VGA monitor which is connected is not automatically
recognised, it can be activated manually by holding down the panic button for 5 seconds.
Setup Menu...
Term
Progress
Zoom
Network
Freeze & Sequence
Free Space
Date
Time
User Name
Camera
No.
Title
Record
PTZ
Text-In
Display Dwell
Transparency
OSD Margin...
40
Devices Display
Symbol Displayed symbol
-
-
-
-
-
-
-
-
-
OSD
Meaning
Activates display of:
Visible when Zoom mode enabled
Visible when DVR operating in a network
● Freeze
● Visible when Sequence mode enabled
● Visible when Recycle mode enabled
● Remaining hard disk capacity, if Recycle
mode not selected
Date
Time
Display of user name
Activates display of:
Display of camera number
Display of camera title
Display of Record symbols
Visible when PTZ camera is displayed
Display of character string
Text In Dwell Time
Transparency of menu screens
Distance of displayed symbols from screen
margin
DLR-04/xxx