Available Multi Slot Parameters - Akai Advance 61 User Manual

Available Multi Slot Parameters

Below is a list of available parameters for each multi slot.
Lo Key / Hi Key These fields indicate (respectively) the lowest and highest incoming MIDI notes that the slot
will use to play its patch. The slot will ignore any incoming notes outside of this range.
Tip: This is also useful for playing multiple patches simultaneously. Set certain slots'
regions so they overlap others, causing multiple patches to play at the same time,
creating new sounds and tonalities. This also is useful for creating different regions on
your Advance 61 to play specific patches only. For instance, you could assign 5 non-
overlapping, 2-octave regions of the keyboard to play 5 different patches.
The multi slot will be transposed by this many semitones up or down. The available
Transpose
range is -36 to +36. 0 indicates the center (no transposition). This is useful if you want to
offset the pitches that are available to you on your Advance 61's pads.
This is the MIDI channel over which the multi slot will send its MIDI message when you
MIDI Ch
play its patch. You can select All channels or any one of Channels 1–16.
Mute This is the slot's current mute status. When this is On, the slot is muted.
Solo This is the slot's current solo status. When this is On, all other slots are muted. You can
solo multiple slots simultaneously.
44