Available Control Parameters
Below is a list of available parameters for each type of control.
Encoders
Type
This determines whether the encoder controls a parameter for a plugin in VIP (VST
Param; the encoders will be orange/yellow) or sends a MIDI CC message to your
DAW (the encoders will be green/aqua).
Parameter or CC
When Type is set to VST Param, this is the parameter for a VST plugin in VIP that is
controlled by the encoder. When Type is set to MIDI CC, this is the MIDI CC number
(upper-left field)
for a parameter in your DAW that the encoder controls.
Min / Max
These determine the lowest (Min) and highest (Max) values. The available range is
0%–100%.
Mode
This determines whether the encoder's operation is normal (Default) or Bipolar:
Important: These Mode operations will be reversed if Invert is set to On.
Invert
This determines whether the encoder's polarity is normal (Off) or inverted (On).
31
•
Default: The encoder's minimum position corresponds to 0.
•
Bipolar: The encoder's 12 o'clock position corresponds to 0, while turning it
clockwise from that position will set the parameter to positive values, and turning
it counterclockwise will set it to negative values.