Display And Navigation - Akai Advance 61 User Manual

Display and Navigation

Advance 61's display shows information about its current mode and operations. You can navigate its
different modes, pages, etc. by using the following controls:
• Data Dial: Use this dial to change a selected parameter values, settings, etc. in the display. Press the
dial to enter or confirm a command or setting. You can also use this dial to scroll through lists, menus,
and browsers.
• Cursors: Use these buttons to navigate through the menus and options in the current page in the display.
• Page Left/Right: Use these buttons to move between the available pages in the display. When there is a
page available to the left or right of the current one, the corresponding button will light up.
• Mode Buttons: Press one of these buttons to enter its primary mode (labeled above the button). Press
and hold Shift and then press one of these buttons to its secondary mode (labeled under the button).
The display contains the essential information you'll need during performance, recording, or production.
When using VIP, though, the VIP software window on your computer may contain additional information,
depending on the current mode. Keep this in mind while exploring the different modes in VIP (see the
section for more information).
15
Mode
Buttons
Display
Page Left/Right
Data
Dial
Cursors
Modes