Restarting The Computer; Sleep Mode - Toshiba KIRA Series User Manual

Restarting the computer

Certain conditions require that you reset the computer, for example if:
To restart the computer, there are two ways this can be achieved:

Sleep Mode

If you have to interrupt your work, you are able to turn off the power without
exiting from your software by placing the computer into Sleep Mode. In this
mode, data is maintained in the main memory of the computer. When you
turn on the power again, you can continue working right where you left off.
When you have to turn off your computer aboard an aircraft or in places
where electronic devices are regulated or controlled, always shut down the
computer. This includes turning off any wireless communication
functionalities, and canceling settings that reactivate the computer
automatically, such as a timer recording function. Failure to shut down the
computer in this way could allow the operating system to reactivate and run
pre-programmed tasks or preserve unsaved data, which could interfere
with aviation or other systems, possibly causing serious injury.
User's Manual
You change certain computer settings.
Click the power icon (
In the Settings charm, click Power and then select Restart.
Press CTRL, ALT, and DELsimultaneously (once) to display the menu
window, and then select Restart by clicking the power icon (
lower-right corner.
Before Restarting the computer, be sure to save your data.
Before entering Sleep Mode, be sure to save your data.
To prevent data loss, do not switch to Sleep Mode while transferring
data to external media, such as USB devices, memory media, or other
external memory devices.
When the AC adaptor is connected, the computer will go into Sleep
Mode according to the settings in the Power Options (to access it,
click Control Panel -> System and Security -> Power Options
under Windows System in the Apps view).
To restore the operation of the computer from Sleep Mode, tap or click
the Touch Pad, or press and hold the power button or any key on the
keyboard for a short amount of time. Note that keyboard keys can only
be used if the Wake-up on Keyboard option is enabled within the
TOSHIBA System Settings.
) on the Start screen and then select Restart.
) in the
2-10