Toshiba KIRA Series User Manual page 56

documents, streamed/local media contents or other online contents can be
shared wirelessly with others.
To use wireless display, either one of the following devices is required:
To wirelessly connect to an external display, you can follow the steps as
described below:
1.
2.
3.
After the connection is established, the name of the wireless display device
will appear under Projectors.
To disconnect the Wireless display device, click the wireless display device
name and then click Remove device.
Changing the external playback settings
After one or more external displays are connected, the operating system
can automatically detect, identify and setup the display settings.
You can also manually manage how the external displays will work and
change the display settings by pressing P while holding down the
Windows (
the computer's power off, be sure to switch to the internal display.
When you change the display output device, the audio playback device
may not switch automatically. In this case, in order to set the playback
device to the same device as the display output device, adjust the audio
playback device manually by the following steps:
1.
2.
3.
4.
5.
User's Manual
A compatible external display with built-in support for wireless display.
An external display with HDMI port and a wireless display adaptor.
The wireless display adaptor is a device that connects to the external
display via HDMI port and can receive Wi-Fi signals from your
computer.
In the Settings charm, click Change PC settings -> PC and devices
-> Devices.
Click Add a device. Your computer will start searching for the wireless
display device.
After the wireless display device is searched, follow the on-screen
instructions to finish connection.
) key. If you disconnect the external display before you turn
Click Control Panel -> Hardware and Sound -> Sound under
Windows System in the Apps view.
In the Playback tab, select the playback device which you want to
switch to.
To use the internal speakers on your computer, select Speakers. To
use the television or the external monitor that you have connected to
the computer, select a different playback device.
Click the Set Default button.
Click OK to close the Sound dialog.
4-15