Troubleshooting - Kobalt KM2040X-06 User Manual

20 in., 40 v lithium-ion dual blade mower
Table of Contents

Advertisement

CARE AND MAINTENANCE
The grass catcher components, discharge cover, and trail shield are subject to wear and damage,
which could expose moving parts or allow objects to be thrown. As a safety precaution, check
these components frequently, and immediately replace any parts that show signs of wear, or that
are cracked or broken. Use original equipment manufacturer's (OEM) parts only, as listed in this
manual.
When it is not in use, store the mower indoors in a dry area, and out of the reach of children.
WARNING
Always remove battery when servicing or transporting the mower.

TROUBLESHOOTING

PROBLEM
The mower does
not start.
The mower cuts
the grass unevenly.
The mower does
not mulch properly.
The mower is hard
to push.
The mower is
excessively noisy
and vibrates.
The mower speeds
up and slows down
while in operation.
POSSIBLE CAUSE
1. The battery is not charged.
2. The switch is defective.
3. Grass jammed at blade.
4. The battery is not inserted all the
way in.
5. Battery may require replacement.
1. The lawn is rough or uneven.
2. The cutting height is not set
properly.
1. Wet grass clippings are sticking to
the underside of the deck.
2. The mulching plug is missing.
1. The grass is too tall, or the cutting
height is too low.
2. The rear of the mower housing
and the blade are dragging in thick
grass.
1. The motor shaft is bent.
2. The blade is unbalanced.
1. This is normal. Power save feature
automatically adjusts the cutting
speed of the blades to match the
application to give the best possible
cut while maximizing run time and
battery life.
CORRECTIVE ACTION
1. Charge the battery.
2. Replace the switch (Call 1-888-
356-2258).
3. Remove battery check under
deck for jams.
4. Press the battery in until it clicks.
5. Return the battery to the place of
purchase.
1. Check the mowing area.
2. Move the wheels to a higher set-
ting.
1. Wait until the grass dries before
mowing.
2. Install the mulching plug.
1. Raise the cutting height.
2. Empty the grass clippings from
the grass catcher bag.
1. Stop the motor, and inspect for
damage.
2. Repair before restarting. If
vibration persists, call the toll free
helpline (1-888-356-2258)
1. None, this is normal.
kobalttools.com
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents