Active Or Passive Arming; Ignition Door Locks; Security Lock; Trunk/Hatch Release (Zone 6) - Fortin FSA-206L FSA-208 User Manual

ACTIVE OR PASSIVE ARMING

Passive Mode will allow the Alarm to automatically rearm itself 60 seconds after it is disarmed if no
door(s) (or trunk) are open(ed). Opening a door before the 60 seconds has expired will reset the timer
but will also prevent the Alarm from locking the doors. This option is enabled by default and the Alarm
will never arm as long as at least one door is left open. When this feature is disabled the Alarm is
considered to be in Active Mode which requires the remote transmitter to arm the Alarm.
Note: The automatic rearm can be deactivated by pressing the UNLOCK button.

IGNITION DOOR LOCKS

Ignition Door Locks is an automatic passenger safety feature. When enabled the Remote-
Starter/Alarm will automatically LOCK the vehicles doors once the key is turned to the ignition
(ON/RUN) position and the brake pedal is pressed. The Remote-Starter/Alarm will also automatically
UNLOCK the vehicles doors once the key is turned to the OFF position.

SECURITY LOCK

Security Lock triggers the vehicle's door locks after the Remote-Starter has shut down. In some cases
before the Remote-Starter is able to start the vehicle it must disarm the Original Equipment
Manufacture (OEM) anti-theft system first (if equipped) to prevent a false alarm when the vehicle is
running. After the Remote-Starter runtime has expired and the Remote-Starter shuts down, the
Security Lock will re-arm the OEM anti-theft system in order to return the vehicle to its original
protective state.

TRUNK/HATCH RELEASE (ZONE 6)

The vehicle's trunk or rear hatch (if installed) can be opened by pressing the TRUNK button. The Alarm
will not disarm but it will ignore the trunk zone until it is closed.

RUNTIME

On gas engines the Remote-Starter can run the vehicle for either 3, 7 or 15 (default) minutes. On
diesel engines the Remote-Starter can run the vehicle for either 6, 15 or 30 (default) minutes.

RUNTIME RESET (5 BUTTON TRANSMITTER ONLY)

Once the vehicle is running with the Remote-Starter the runtime can be reset (before it expires) at any
time by pressing the START button while the vehicle is Remote-Started. The horn/siren will sound
once to confirm (If installed).

SECURE TRANSMITTER MODE

Secure Transmitter Mode is a safety feature that prevents accidental button activation. The Remote-
Starter will ignore short TRUNK and START button presses from the remote transmitters, and
requires the buttons to be pressed for at least 3 seconds. If enabled, ALL remote transmitters
(including multi-vehicle transmitter) will require a 3 second button press.

ALARM

AUDIBLE CONFIRMATION

By default the Alarm will not send an audible confirmation (horn/siren) after the first signal has been
received from the remote transmitter(s).
Press the TRUNK, LOCK or UNLOCK button ONCE and the park lights will flash, but the horn/siren
SILENT :
will NOT confirm the signal.
Pressing the same button TWICE consecutively the park lights will flash, and the horn/siren will
AUDIBLE :
confirm the signal.
The Alarm can be programmed to audibly confirm the signal on the first button press. (See Installation
Guide p.14).
11