Please read and comply with 20 High pressure hose these original instructions prior 21 Push handle to the initial operation of your appliance and 22 Cable clamp store them for later use or subsequent own- 23 Dosage valve for detergent ers.
separator as per EN 12729 Type BA. Water When the maximum operating over pres- flowing through a system separator is con- sure is exceeded, the overlow valve opens sidered non-drinkable. and the water flows back to the pump inlet. The overflow valve and pressure switch are Caution set and sealed at the factory.
ance to the power supply. The plug is only Attaching the Accessories for mains separation. Mount the nozzle on the spray pipe Check the power cord with mains plug for (markings on the adjustment ring at the damage before every use. If the power cord top).
Open the water supply. A firm grip impedes blood circulation. – Continuous operation is worse than an – Drawing in water from open reservoirs operation interrupted by pauses. Screw the suction hose (order no. In case of regular, long-term operation of 4.440-270.0) onto the water connec- the device and in case of repeated occur- tion.
treatment of the environment use detergent Shut off water supply. economically. Activate hand spray gun until device is Follow the safety instructions for using de- pressure-less. tergents. Press the safety lever of the hand-spray Kärcher detergents ensure smooth func- gun to secure the lever of the pistol tioning.
ance. To carry, hold the appliance at Please arrange for the immediate ex- the handles and not at the pushing han- change of a damaged high-pressure dle. hose. Prior to transporting the appliance in Check appliance (pump) for leaks. horizontal position, remove the deter- 3 drops per minute are permitted and gent bottles from the bottle holder and...
Spare parts Appliance is not running Check connection cable for damages. Only use accessories and spare parts – Check the supply voltage. which have been approved by the man- Turn device switch on "0" and let engine ufacturer.
EC Declaration of Conformity We hereby declare that the machine de- scribed below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us.
Technical specifications Type HD 7/11-4 M 1.524-129.0 Main Supply Voltage 230...240 Current type 1~ 50 Motor rpm 1/min 1400 Connected load Protection (slow, char. C) Type of protection IPX5 Maximum allowed net impedance 0.294+j0.184 Extension cord 30 m Water connection Max.