ECS K7VMM User Manual page 34

OnBoard IR Port
This item enables or disables the Infrared port, and assigns a port address. If
you select a specific address, the resources are assigned to the IR port, and
you can use the five items below to determine the operation of the IR port.
Onboard Parallel Port
This item enables or disables the onboard LPT1 parallel port, and assigns a
port address. The Auto setting will detect and available address.
Parallel Port Mode
This item decides the parallel port mode. You can select SPP (Standard Paral-
lel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or
ECP + EPP.
Parallel Port IRQ
This item assigns either IRQ 5 or 7 to the parallel port.
Parallel Port DMA
This item assigns a DMA channel to the parallel port. The options are 0, 1 and
3.
OnBoard Game Port
This item enables or disables the I/O address for the game port.
OnBoard MIDI Port/IRQ
This item enables or disables the onboard MIDI port, and assigns a port ad-
dress.
MIDI Port IRQ
This item assigns IRQ 5 to the parallel port.
OnBoard IDE
This item enables or disables either or both of the onboard Primary and Sec-
ondary IDE channels.
OnChip LAN
This item enables or disables the OnChip LAN.
Onboard AC'97 Audio
This item enables or disables the onboard AC'97 audio chip.
Onboard AC'97 Modem
This item enables or disables the onboard AC'97 modem chip.
USB Controller
Enable this item to select the USB ports or disable.
USB Device Legacy Support
This item enables the USB device, if you have installed a USB device on the
system board.
30