Countdown Timer; Alarm - Junghans Mega 1000 Operating Instructions Manual

5.2. Countdown timer

T4 T1
Press T3 until TIMER mode is selected.
T5
T3 T2
T4 T1
The timer is set using T1 (set+) and T2 (set–). Press the
button briefly to adjust the time by the second. If you
hold the button down the time changes quickly.
T5
T3 T2
T4 T1
The countdown timer is started/stopped with the T4
button. When the countdown timer is running the
tag "ON" appears above the TIMER menu item in the
display.
T5
When the countdown timer reaches 00:00:00 an
T3 T2
acoustic signal sounds.
50

5.3. Alarm

T4 T1
Press T3 until ALARM mode is selected.
T5
T3 T2
T4 T1
The alarm time is set using T1 (set+) and T2 (set–).
When the buttons are pressed briefly the time chan-
ges by the minute, but if the button is held down the
time changes quickly.
T5
When the alarm time is adjusted the alarm is auto-
T3 T2
matically activated. The tag "ON" appears in the
display.
T4 T1
The alarm is activated or deactivated using the T4
button. When the alarm is active the tag "ON" appe-
ars above the ALARM menu item in the display. When
the time that the alarm is set to is reached an acou-
T5
stic signal sounds.
T3 T2
51