Specifications - Makita 5008B Instruction Manual

SPECIFICATIONS

Max. cutting depth
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
SYMBOLS
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
...................Read instruction manual.
...................DOUBLE INSULATION
2
Model
Blade diameter
at 90°
at 45°
-1
)
Overall length
Net weight
Safety class
END201-1
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
5008B
210 mm
74 mm
58 mm
5,200
310 mm
5.3 kg
/II