Table of Contents
Advertisement
4. Front panel and rear panel
5. Thread spool cover
Remove setscrews (bottom) [10] and [11] in the
front panel (Mas. asm.).
[10]
Remove setscrews [12] , [13] and [14] in the rear panel (asm.)
and setscrew (rear) [15] in the front panel (Mas. asm.).
(Lift the presser lifting lever when removing screw [15] .)
[12]
Remove setscrew (upper) [16] in the thread spool cover and
setscrew (side) [17] in the thread spool cover. (Lower the thread
take-up support and insert a screwdriver from the face cover
side to remove setscrew (side) [17] in the thread spool cover.)
Open the rear panel in the rear and remove the thread spool
cover upward.
[17]
Thread take-up support
-6-
-6-
-6-
-6-
-6-
[11]
[13]
[15]
[14]
[16]
[17]
Hide quick links:
Advertisement
Table of Contents
