ECS P6BAP-Me User Manual page 57

Fax/modem Extension Bracket
MDM1
The fax/modem extension bracket is supplied with this mainboard.
1. Locate the MDM1 fax/modem connector on the mainboard.
2. Remove the expansion slot blanking plate from the system chassis
that is adjacent to the fax/modem connector.
3. Install the fax/modem extension bracket on to the MDM1 connector
as shown below. The RJ11 Line and Telephone sockets on the
bracket are positioned in the expansion slot with the removed
blanking plate.
Line and Tel
RJ11 sockets
MDM1
fax/modem
connector
Fax/modem
extension bracket
33