Welcome - ECS P6BAP-Me User Manual

Resume by Ring/Alarm
If you enable this item, the incoming calls to a fax/modem or incoming traffic to a
netork adapter can resume the system from a power-saving mode. You might
have to make a hardware connection on the system mainboard in order to
implement this feature.
Resume by Alarm
If you enable this item, you can use the Date and Timer items which appear to
install your system with an alarm time and date on the system's realtime clock.
When the alarm time is reached, the system will resume from a power-saving
mode.
Primary INTR
If you enable this item you can use the list of interrupt options that appears below
to determine the effect that each interrupt can have on the system power
management. If you set this item to OFF, then the interrupts have no effect on
system power management.
IRQ3 (COM2)....IRQ15 (Reserved)
These items appear if Primary INTR is set to ON. For each interrupt request line,
you can set it to Disabled, Primary or Secondary. If it is set to disabled, the IRQ
has no effect on system power management. If it is set to Secondary, activity on
the IRQ can reset the power-saving mode timeout counters. If it is set to Primary,
acivity on the IRQ can reset the power-saving mode timeout counters and
resume the system from a power saving mode.
Default: Disabled
Default: Disabled
Default: On
47