ECS P6BAP-Me User Manual page 40

Check all the mainboard jumpers to ensure that the board is configured
correctly.
JP1: Clear CMOS Memory Jumper
This jumper lets you erase the system setup settings that are stored in
CMOS memory. You might need to erase this data if incorrect settings
are preventing your system from operating. To clear the CMOS memory,
turn off the system, disconnect the power cable from the mainboard, and
short the appropriate pins for a few seconds.
JP1 1
Function
Normal Operation
2
Clear CMOS
3
JP2: Keyboard Power On Jumper
This jumper lets you use a typed-in password as a power switch to turn
your system on. If you enable this property, you need to define the
password or the hot keys using the setup utility. See Chapter 3 for more
information.
Function
Enable keyboard power on
Disable keyboard power on
JP3: Audio System Enable/disable Jumper
This 3-pin jumper can be used to enable or disable the onboard audio
system. If you prefer to install a different audio system on a third party
expansion card, you must disable the onboard audio in order to free up
resources for the alternate sound card.
Function
Enable audio system
Disable audio system
16
Jumper Cap
Short pins 1-2
Short pins 2-3
Jumper Cap
Short pins 1-2
Short pins 2-3
Jumper Cap
Short pins 1-2
Short pins 2-3
JP2
1 2 3
JP3
1 2 3