ECS P6BAP-Me User Manual page 23

Power Management
This item acts like a master switch for the power-saving modes and hard disk
timeouts. If this item is set to Max Saving, doze and suspend mode, will occur
after a short timeout. If this item is set to Min Saving, doze and suspend mode
will occur after a longer timeout. If the item is set to User Define, you can insert
your own timeouts for the power-saving modes.
PM Control by APM
Windows 95 and 98 have built-in power management capabilities called APM
(Advanced Power Management). When you enable this item, you allow the APM
routines in Windows to operate on your system.
Video Off After
This option defines the level of power-saving mode required in to power down
the video display. As a default, the video powers down in suspend mode.
Video Off Method
This item defines how the video is powered down to save power. As a default,
this is set to DPMS support (display power management software).
MODEM Use IRQ
Use this item to assign an IRQ (Interrupt Request Line) to the modem that is
integrated on this mainboard.
Default: User Define
Default: Yes
Default: Suspend
Default: DPMS Support
Default: 3
45