KYMCO Active 50 Service Manual page 86

8. ALTERNATOR/STATER CLUTCH/
CAM CHAIN TENSIONER
Install the chain, drive sprocket and driven
sprocket as an assembly.
Install the following components:
-snap ring.
-stopper plate.
-chain sliders.
Install the alternator stator base and secure it
with the two bolts.
Install the grommet into the grove of the left
crankcase cover.
Install the wire clamp.
Install the woodruff key on the crankshaft,
Wipe all oil lff the inside of the flywheel
amd crankshaft, and install the flywheel
aligning its groove with the woodruff key.
Install the flywheel, turning it
counterclockwise.
Install and tighten the flywheel nut while
holding the flywheel with a flywheel holder.
TORQUE: 3.2～4.0 kg-m
Special
Flywheel Holder
Drive Sprocket
8-7
Snap Ring
Chain Sliders
Grommet Clamp
Flywheel Holder
ACTIVE 50
Chain
Stopper Plate
Bolts
Stator Base
Nut