Cassette Paper Pickup Drive Motor; Registration Roller Drive Clutch - Lexmark Optra C Service Manual

Cassette Paper Pickup Drive Motor

See Assembly 24-9.
1. Open the multipurpose paper pickup door.
2. Release the two green cassette latches.
3. Slide the cassette out enough to remove the two retaining
brackets and remove the cassette assembly.
4. Remove the two screws and the motor drive cover.
5. Remove the wires from the retainer and remove the wire
retainer.
6. Tip the cassette back and remove the three bottom cover
screws and the cover.
7. Disconnect the motor connector from the PCB.
8. Remove the two motor mounting screws and the motor.

Registration Roller Drive Clutch

See Assembly 24-11.
1. Open the multipurpose paper pickup door.
2. Release the two green cassette latches.
3. Slide the cassette out enough to remove the two retaining
brackets and remove the cassette assembly.
4. Remove the two screws and the motor drive cover.
5. Remove the wires from the retainer and remove the wire
retainer.
6. Tip the cassette back and remove the three bottom cover
screws and the cover.
7. Disconnect the clutch connector from the cable harness.
8. Remove the E-clip and the clutch assembly.
4-4