Sirius XM RAdio Starmate STS User Manual page 90

Select an item from the list and the playback will commence from that point in the
stored audio. If you select "«Live»" the STS will exit the SIRIUS Replay mode and
resume playing the live broadcast.
NOTE: IF YOU TUNE THE STS TO ANOTHER CHANNEL WHILE IN THE SIRIUS REPLAY MODE, THE
SIRIUS REPLAY MODE IS EXITED, ALL THE AUDIO STORED IN THE SIRIUS REPLAY MEMORY IS ERASED,
AND THE NEWLY-TUNED CHANNEL BEGINS TO PLAY. ALSO NOTE THAT TUNING TO ANOTHER CHANNEL MAY
OCCUR AUTOMATICALLY IF ANOTHER FEATURE OF THE STS HAS BEEN PROGRAMMED TO DO SO.
Fast-Forward Button
~~:
The Fast-Forward button moves you forward through the
stored audio.
• Pressing-and-releasing the Fast-Forward button forwards to the start of the next
song or program in the stored audio and playback automatically begins from there.
Repeatedly pressing and releasing the Fast-Forward button continues to move for-
ward in the stored audio to the starts of each song or program until the end of the
stored audio is reached. When you reach the end of the stored audio you will hear a
beep (if the Confirmation Tone option is enabled,
see
page 101), the STS will exit the
SIRIUS Replay mode and resume playing the live broadcast.
• Pressing-and-holding the Fast-Forward button for one second advances the playback
forward in 10 second intervals, which increases to 15 and then 30 second intervals
the longer the Fast-Forward button remains pressed. Playback begins immediately
when you release the button. When you reach the end of the stored audio you will
hear a beep, the SIRIUS Replay mode will be exited, and the STS will resume playing
the live broadcast.
Rewind Button ........ :
The Rewind button moves you backwards through the stored audio.
• Pressing-and-releasing the Rewind button rewinds to the start of the current song or
program in the stored audio, and playback automatically begins. Repeatedly pressing
and releasing the Rewind button continues to move backwards in the stored audio to
the start of each previous song or program until the beginning of the stored audio is
reached. If you reach the beginning of the stored audio you will hear a beep (if the Con-
firmation Tone option is enabled, see page 101) and playback will automatically begin.
90
Operation