JUMPSET
1.
On the JUMP SETTINGS screen (see Figure 102, on page 100), highlight and select
JUMPSET. The JUMPSET screen will appear (see Figure 105).
Tlme to desired Ch.
F't-·e;:.;:·
f:
ho 1d
then button
Figure 105
2.
Tune to the channel you want assigned to the Jump button (you can use the
Channel UP/DOWN buttons, your presets or enter the channel number directly).
When the channel is tuned, press and hold the Jump button for 2 seconds until the
screen in Figure 106 is displayed.
Figure 106
The selected channel is now assigned to the Jump button.
NOTE: WHILE LISTENING TO ANY CHANNEL OTHER THAN A TRAFFIC CHANNEL, YOU CAN ASSIGN THAT
CHANNEL TO THE JUMP BUTTON BY SIMPLY PRESSING AND HOLDING THE JUMP BUTTON FOR
2
SECONDS.
Menu Options
101