12-8) When Room Lamp Does Not Light Up(F &R Rooms Are The Same) - Samsung RB215LASH Service Manual

Diagnostics
2) When PANEL PCB Buttons do not work
of Upper Hinge Cover inserted
of MAIN PCB Connector (CN50)
of PANEL PCB Connector
of 6 buttons pressed?
Is CHILD LOCK BUTTON
Recheck/Change MAIN PCB ASS'Y
12-8) When Room Lamp does not light up(F &R Rooms are the same)
1) When F &R Room Lamps do not light up
Pre-Check
- Room Lamp(F,R)
1. Check F-Room Lamp ON after opening Freezer Door.
2. Check F-Room Lamp OFF by pushing Door S/W.
3. Check R-Room with using the same method
4. When it's problems, check Room Lamp and Door S/W (Refer to Door S/W sensor circuit)
5. Check the electric wire connect status.
Start
Is Connector
well?
YES
Is insertion
normal?
YES
Is insertion
normal?
YES
Is there any
NO
pressed?
NO
NO
Re-insert Connector,
Check contacts
NO
Re-insert MAIN PCB
Connector, Check contacts
NO
Re-insert PANEL PCB
Connector, Check contacts
YES
Re-assemble PANEL PCB
COVER
YES
Release CHILD LOCK
after closing Freezer Door.
67