Technical Data - Lindy CAT5 User Manual

Technical Data and Radio Frequency Statement

Technical data

Measurements:
Local and Remote Unit:
Weight, approx:
Operating temperature:
Storage temperature:
Humidity:
For indoor use only, in a dry environment with non-condensing vapour.
Power supplies:
CE remark
This equipment has been tested and found to comply with the limits for Information Technology
Equipment of the European Community.
FCC remark
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instruction manual, may cause interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that which the receiver is
connected

Consult the dealer or an experienced radio/television technician for help.
Tested to comply with FCC Standards
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - 2nd EDITION (November 2003)
16.5 x 9 x 2.6cm (WxDxH )
380g (each unit), 1.5kg total
0 ... 40 degrees C (32 ... 104 F)
-20 ... 60 degrees C (-4 ... 140 F)
0 ... 80 RH, non condensing
9V AC, 500mA, 2.5 (5.5) mm connector