Technical Specifications - Lindy HDMI 4K Premium C6 User Manual

Technical Specifications

Max. 12Gbit/s. total bandwidth over HDBaseT connection using RJ45 cable.
The HDBaseT connection is a dedicated cable connection, it is not a Gigabit Ethernet
connection! Solid core installation cable must be used to reach large distances.
Maximum cable length for the HDBaseT connection: 100m (approx.)
Compatible with HDMI 1.2, 1.3a/b/c, 1.4 and DVI 1.0 with HDCP, up to 10.2 Gbps / 340MHz
per link
FullHD 1080p with up to 36/12 bit colour depth with 3D support and HDMI CEC support
Supported resolutions: 640x480i, 720x480i/p, 720x576i/p, 1024x768, 1280x720i/p,
1280x960, 1280x1024, 1600x1200, 1920x1080i/p, 1920x1200, 4K
Supported audio: multi-channel including all HDMI supported protocols, DTS-HD Master
Audio, Dolby Digital Plus, Dolby TrueHD
IR sensor and IR transmiter supported on both units with up to 15m signal distance
IR frequencies 30 – 50kHz supported – 20kHz not supported (i.e. some Sky boxes)
RS232 DB-9 Connector on TX and RX with Bi-directional transfer up to 192000 Bit/s
Transmitter and Receiver each have a 3 RJ45 ports switch for 10/100 Ethernet support. The
10/100 switches are also connected via the HDBaseT connection
Receiver is powered via the HDBaseT connection from transmitter
Operating Temperature ~0 – 40 °C / ~32 – 104°F
Storage Temperature ~-20 – 60°C / -4 – 140 °F
Relative Humidity ~20 – 90 % RH (non condensing) – For Indoor Use Only
Dimensions: approx. 13 x 13 x 3cm (L x W x H) ; Weight: ~0.4kg (each unit)
Multi-Country wall mount power supply (100...240VAC / 24V DC/~1.25A)
Power Consumption typical 6W (TX) and 8W (RX)
Pin Assignment of RJ45 connector acording to 568-B Pin Assignment of IR TX and RX
IR Transmitter
11
Power 5V
IR transmitter signal
NC
IR receiver signal
Power 5V
Ground