Advertisement
Available languages
Available languages
Introduction
Thank you for purchasing the LINDY USB 2.0 Cat.5 Extender, which is composed of a
Transmitter and Receiver. It enables a USB 2.0 host device to send data up to 100 metres. The
receiver unit has an integrated 4 port hub for connection of multiple USB peripherals.
Package Contents
• Transmitter Unit
• Receiver Unit
• Multi-Country Power Supply 5V DC 1A for Transmitter unit
• Multi-Country Power Supply 5V DC 2A for Receiver unit
• USB 2.0 A/B cable
• Assembly Screws
• LINDY Manual
Features
• True plug and play, no driver installation required
• Extends USB 2.0 high-speed and USB 1.1 (low-speed, full-speed) devices up to 100m
over Cat 5e (or better) cable
• Integrated four port hub
• Supports all USB device types: Control, Interrupt, Bulk and Isochronous at up to
480Mbps
• Supports all major operating systems with USB support
Technical Specifications
• Transmitter: Input Port 1x USB 2.0 B, Output Port 1x RJ45
• Receiver: Input Port 1x RJ45, Output Port 4x USB 2.0 A
• Dimensions: 9 x 7.3 x 3.1cm each
• Weight: 163g / Transmitter, 169g / Receiver
• Operating Temperature: 0 – 50°C
• Storage Temperature: -20 – 70°C
• Humidity: 0-80% RH, non-condensing
Installation
1.
Place the local extender near the host computer. Install the supplied USB cable between
the Transmitter and USB port on the host computer.
2.
Connect the supplied 5VDC 1A power adapter to the Transmitter.
3.
Place the Recevier near the USB device in the desired remote location.
4.
Connect the supplied 5VDC 2A power adapter to the Receiver.
5.
Connect the Transmitter and Receiver by using a Cat.5 (or better) cable (not included!).
LED indications
• Red Power LED: The 5V power adapter is plugged in
• Orange Link LED: Transmitter and receiver are powered & connected by Cat.5 cable
• Green Active LED: Receiver´s USB port(s) are occupied
[1]
Advertisement
