Installation Instructions - KingsBottle KBU-25 User Manual

PART III

INSTALLATION INSTRUCTIONS

CUTOUT DIMENSION ILLUSTRATED
KBU-170 SERIES
23.54"W x 26.97"D x 71.69"H
(598W x 685D x 1821H mm)
Included stand height 0.98"(25mm)
MODEL WIDTH
KBU-25 494 mm
KBU-50 23.42"
595mm
KBU-100 23.54"
598mm
KBU-170 23.54"
598mm
www.kingsbottle.com!
KBU-100 SERIES
23.54"W x 26.97"D x 55.43"H (598W
x 685D x 1408H mm) Included stand
height 0.98"(25mm)
DEPTH HEIGHT INCLUDED STAND HEIGHT
595 mm 841 mm
23.62" 33.86"
600mm 860mm
26.97" 55.43"
685mm 1408mm
26.97" 71.69"
685mm 1821mm
INSTALLATION
KBU-50 SERIES
23.42"W x 23.62"D x 33.86"H
( 595W x 600D x 860H mm )
Included stand height 0.79" (20mm)
This free-standing model can be built in to cabinetry if
adequate ventilation is supplied. Allow a minimum of 3/4" on
either side, 2" at the rear, and 3/4" on top.
0.79" These front-venting models can be built in to cabinetry.
20mm Builders should allow an additional 1/2" either side of the
unit, plus 1" behind the unit and 1/2" on top. These
0.98"
additional spaces allow units to be placed in position easily,
25mm
and without power cords being damaged. This also allow
hot air that is vented from the front to rise quickly and clear
0.98"
the cool air intake manifold. These clearances help to keep
25mm
power consumption to a minimum and prolong the life of
your refrigerator
KBU-25 SERIES
15.01"W x 24.03"D x 34.87"H
( 381W x 610D x 885H mm )
Included stand height 0.98" (25mm)
NOTE
!
5