Assembling The Blending Arm - KitchenAid KHB3581 Instructions For Use & Care

ASSEMBLING THE HAND BLENDER

Assembling the blending arm

IMPORTANT: Always wait to insert battery into Hand Blender until accessories are attached. After
using, always remove battery before disassembling Hand Blender.
Insert blending arm into desired bell
1
blade (see "Attachment guide"). Twist
to lock until it clicks.
Insert blending arm into motor body
3
and twist until it clicks to lock in place.
Snap pan guard into place with an even,
5
downward motion.
10
Remove the bell guard from the blade.
2
Mounting
grips
If using a pan guard, place it on a flat
4
surface and position with mounting clips
between the openings of the blade.
Use the bell guard
to avoid damage to
blade when Hand
Blender is not in use.
Bell guard
Use the pan guard
to avoid damage to
cookware while using
Hand Blender.
Pan guard
Opening