Operating The Hand Blender; Using The Led Display Panel - KitchenAid KHB3581 Instructions For Use & Care

OPERATING THE HAND BLENDER

Using the LED display panel

IMPORTANT: The unlock button must be pressed before the Hand Blender will operate.
When operating the controls on the
1
Hand Blender, always make sure the
LED display is facing toward you. Grip
the handle with your thumb on the
back of the unit, and your fingers on the
controls in front, as shown.
Speed control
buttons
Speed selection
indicator
The top bar on the LED display panel is
3
the speed selection indicator. To adjust
speeds, operate the arrow buttons
with your index finger, while viewing
the speed indicator on the LED display.
When the LED faces you, the right
button will increase the speed and the
left button will decrease the speed.
12
LED display
NOTE: The Hand Blender will automatically
power down after 60 seconds of not operating
or being manually unlocked.
Battery life
indicator
Unlock
button
The bottom bar on the LED display
2
panel is the battery life indicator. Hold
the Hand Blender so that you can see
the LED display light up when you
press the UNLOCK button with your
index finger.
After selecting desired speed, press
4
the PULSE button to begin operating
the unit. See "Using the blending arm"
section for more information.
Pulse button