Aligning The Appliance Doors - Miele KFN 14943 SD Operating And Installation Instructions

Aligning the appliance doors

The appliance doors can be
retrospectively aligned to the housing.
In the following illustration the door
is not shown in the closed position to
make it easier to see what happens
next.
Align the lower door using the long
outer slots in the lower hinge plate:
^ Remove centre screw a from the
hinge plate.
^ Slightly loosen both outer screws b.
^ Align the door by sliding the hinge
plate to the left or right.
^ Then tighten screws b again. Screw
a does not need to be refitted.
64
Align the upper door using the long
outer slots in the middle hinge plate:
^ Slightly loosen both screws c.
^ Align the door by sliding the hinge
plate to the left or right.
^ Then tighten screws c.