Miele KFN 14943 SD Operating And Installation Instructions page 57

Caution! The upper appliance door
is not secure once the hinge plate
has been removed.
^ Close the upper door.
^ Loosen screws m in upper hinge
plate n and pull it upwards and off.
^ Carefully lift the upper door off and
place it to one side.
^ Make sure that you leave the hinge
pin in the hinge plate in the middle of
the appliance, as otherwise the lower
door will be unsecured.
^ Then fit cover h together with
retaining plate i on the opposite
side.
^ Refit cover l on the opposite side.
Removing the lower SoftClose door
mechanism
^ Open the lower door.
^ Prise open panel a from the
SoftClose mechanism: Remove the
panel carefully from the top.
Changing the door hinging
Take care not to damage the door
seal.
If the door seal becomes damaged,
the door will no longer close
properly and cooling will be
impaired.
^ Slide panel a towards the appliance,
and leave it hanging between the
door and the appliance.
^ Fit restraining clip b (supplied with
the appliance) onto SoftClose
mechanism c.
The restraining clip stops the hinge
from snapping shut. Do not remove the
clip until told to do so.
^ Carefully remove cover d from the
side using a flat-bladed screwdriver.
^ With the help of another person, tip
the appliance back slightly.
57