Miele KFN 14943 SD Operating And Installation Instructions page 61

^ Attach panel b to SoftClose
mechanism bracket d.
^ Align bracket d to the hinge plate,
and insert pin e from above so that
the right angle fits into the recess.
^ Click cover f back into place.
Make sure that cover f fits properly so
that the door can be closed without
hindrance and the pin is secured.
^ Remove retaining clip g.
^ Replace panel b onto the SoftClose
mechanism from above, clicking it
back into place first at the bottom
and then at the top.
^ Close the lower appliance door.
Changing the door hinging
Refitting the upper door
^ Fit the upper door on middle hinge
pin i.
^ Close the upper door.
^ Fit hinge plate n onto the opposite
side and secure it with screws m.
If necessary, drill pilot holes for the
screws or use a battery operated
screwdriver.
^ Refit cover k on the opposite side.
^ Realign the door with the appliance
housing again. If necessary, use the
long slots in the lower hinge plate.
Then tighten the screws.
61