Table of Contents
Advertisement
7.4
Port Trunking Configuration
Port Trunking Configuration menu controls port trunking or the so called Link Aggregation function. Several ports in the Smart
Switch can be bundled together to form a high-speed trunk. The available choices are listed in the screen once you press
<Add> selection.
For factory default setting, the trunking group list is empty. To set up a new trunk, select the <Add> function. The following
selections list will be shown on screen.
Each item represents a set of ports that can be trunked together. Pressing <Enter> on an item selects the set as a new trunk.
Note that selecting a set of port may cause other sets to be excluded in further selections. More sets can be selected until all
ports are defined.
13
Advertisement
Table of Contents
