Honda CBR1000RR Owner's Manual page 124

6. Remove the brake caliper bracket, rear
wheel and side collars.
u Support the brake caliper so that it
doesn't hang from the brake hose. Do
not twist the brake hose.
u Avoid getting grease, oil, or dirt on the
disc to pad surfaces.
u Do not push the brake pedal while the
brake caliper is removed.
Installation
1. To install the rear wheel, reverse the
removal procedure.
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
Tyre Puncture
NOTICE
When installing the brake caliper into position, carefully
fit the brake disc between the pads to avoid scratching
them.
2. Make sure that the lug on the brake
caliper bracket is positioned in the slot on
the swingarm.
Swingarm
u Removing Wheels
Brake caliper
bracket
Lug
Slot
121