Honda CBR1000RR Owner's Manual page 118

CBR1000RA/SA only
When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
❙
Front Wheel
Removal
1. Park on a firm, level surface.
2. Cover both sides of the front wheel and
brake caliper with protective tape or
cloth.
Brake caliper
Mounting
bolts
Wheel speed sensor
CBR1000RA/SA only
Sensor guide
CBR1000RA/SA only
Bolts
CBR1000RA/SA only
Tyre Puncture
3. CBR1000RA/SA only
Remove the wheel speed sensor by
removing the bolts.
4. On the right side, remove the mounting
bolts and remove the brake caliper.
5. On the left side, remove the mounting
bolts and remove the brake caliper.
u Support the brake caliper so that it
doesn't hang from the brake hose. Do
not twist the brake hose.
u Avoid getting grease, oil, or dirt on
the disc or pad surfaces.
u Do not pull the brake lever while the
brake caliper is removed.
u Take care to prevent the brake caliper
from scratching the wheel during
removal.
u Removing Wheels
115